张坤，男，中国科学院力学研究所博士后、副研究员，硕士生导师。

主要研究方向为涂镀层评价与设计。

1995-07~1997-07,中国科学院金属研究所，博士后。

1997-07~现在，中国科学院力学研究所，博士后、助研、副研究员。

2008-02~2008-08,Loughborough University,Academic Visitor。

2013.07～2015.10中国有研工程师。

2015.10～2015.12中国科学院力学研究所助理研究员。

2015.12～中国科学院力学研究所副研究员。

研究领域

涂镀层评价与设计

论文

1 Kun ZHANG, Qing PENG, Guang-Nan Chen, A special method to evaluate the strong adhesion between brittle coating and ductile substrate, Key Engineering Materials

2 Wu, C.W.; Zhang, K.; Chen, G.N，Characterising of internal stresses in duplex coating by FEM，surface Engineering

3 Huaixue Li, Guangnan Chen, Kun Zhang, Gengxing Luo and Zhijun Ye，Degradation failure features of 铬plated gun barrels with a laser-discrete-quenched substrate，Surface \u0026 coating Technolog

4 Ban-Quan Yang, Kun Zhang, Guang-Nan Chen, Gen.GXing Luo and Jing-Hua Xiao，Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating–steel substrate system，Acta Materialia,

5 Chen-Wu Wu, Ban-Quan Yang, Guang-Nan Chen, Kun Zhang and Jing-Hua Xiao. On the tensile behaviors of a hard 铬 coating plated on a steel substrate with periodic subsurface inclusions. surface and Coatings Technology

6 Kun Zhang, Chen-Wu Wu, Ying Hu, Guang-Nan Chen, The 设计 and application of a novel duplex coating formed by laser pre-treatment, Solid State Phenomena

7 Huanxue Li, Kun Zhang, Guangnan Chen, Gengxing Luo, Zhijun Ye, Characterization of a laser-discrete quenched steel substrate/铬 system by dissolving coatings, surface Coatings and Technology

8 Chen-Wu Wu, Guang-Nan Chen, Kun Zhang/, Ying Hu, Nai-Gang Liang, On the formation of periodic segmentation cracks in a coating plated on a substrate with periodic subsurface inclusions, surface Coatings and Technology

9 B.Q. Yang, K. Zhang, G.N. Chen, G.X. Luo, J.H. Xiao, A quantitative analysis of the effect of laser transformation hardening on crack driving force in steels, Surface Coatings and Technology

10 Huanxue Li, Guangnan Chen, Guoxiang Zhang, Kun Zhang, Gengxing Luo, Characteristics of the interface of a laser-quenched steel substrate and chromium electroplate, surface Coatings and Technology

11 Xuejun Chen. Kun Zhang, Guangnan Chen, Gengxing Luo, Interfacial debonding of a multi-cracked and coated hollow cylinder due to convective heating, Surface Coatings and Technology

12 Chen-Wu Wu, Guang-Nan, Kun Zhang, Gen.GXing Luo, 碘化钠Gang Liang, The effect of periodic segmentation cracks on the interfacial debonding, surface Coatings and Technology

13 Xuejun Chen. Kun Zhang, Guangnan Chen, Gengxing Luo, Multiple axial cracks in a coated cylinder due to thermal shock, International Journal of Solids and Structures

14 Su Jianyu, Zhang Kun, Chen Guangnan，Evaluation of the interfacial adhesion between brittle coating and ductile substrate by cross-sectional indention，材料热处理学报

15 XU Xiang-yang, ZHANG Kun, HAN Jian-min, Chen Guang-nan，Metallographic sample prepared by ion beam etching. Transactions of Nonferrous Metal Society of China

16 G. Song//, K. Zhang and G. N. Chen，Electron beam surface treatment.Vacuum

17 R.G. Song//, K. Zhang, G.N. Chen, Electron beam surface remelting of AISI D2 cold-worked die-steel, Surface Coating and Technology

18 K. Zhang, G.N. Chen, Grain structure of laser remelted 7075 铝 alloy in the presence of Al2O3 particles, Materials Science and Technology

19 Rao Qunli//, Wang Haowei, Zhang Kun, Fan xiaolan, Zhou Yaohe, Effects of heat-treatment processes on the electroless Ni-B coating and its natural aging mechanism, Transactions of the Institute of Metal Finishing

20 K. Zhang, G.N. Chen, Influence of 碳化硅 particulates on grain structure development of an aluminum 7075 alloy during laser rapid solidification, Journal of Materials Science Letters

21 K. Zhang//, G.N. Chen, Effect of SiC particles on crystal growth of Al-Si alloy during laser rapid solidification, Materials Science and Engineering A,

22 杨班权, 陈光南, 张坤, 罗耕星, 肖京华. 涂层/基体材料界面结合强度的表征和测量方法的现状与展望. 力学进展

23卢哲猛，吴臣武，张坤/，彭青，陈光南，涂层界面性能测试的类悬臂梁模型，材料热处理学报

24 张坤，苏建宇，张国祥，吴臣武，彭青，陈光南，横截面压入时典型涂层界面的剥离行为，中国表面工程

25 张坤，罗耕星，陈光南，钛的激光渗氧硬化研究，金属热处理

专利

1张坤，陈光南，罗耕星，肖京华，钛或其合金的快速渗氧硬化方法

2陈光南，武晓雷，罗耕星，张坤，纪全，孙传香：用于细小狭长管状工件内表面激光强化加工的装置

3陈光南，武晓雷，罗耕星，张坤，纪全，孙传香：管状工件内表面激光强化方法与装置(国防)

承担科研项目情况

1“高温合金构件力学性能与制备”，中国科学院知识创新工程重大项目子课题

2“反恐防暴非致命技术”，国防基础科研项目

3“金属表面涂层材料的界面结合性能表征”，国家自然科学基金重点项目

4“涂层工艺力学”，Loughborough University访问学者项目

5“钛合金部件表面处理”，重庆长风机器有限责任公司委托项目

6“基体表层离散强化对涂层开裂和剥落的控制机理”，国家自然科学基金面上项目

7“塑性变形过程中涂层板料的界面断裂机制”，国家自然科学基金面上项目

8“表层材料与超微材料特殊工艺及相关力学问题”，所创新项目

9“表面形貌与性能联合测试系统”，所装备建设项目

10“高能束流表面加工与处理中的超常热物理问题”,国家自然科学基金重点项目

11“狭长管筒内表面激光强化技术及其应用”，中科院应用研究与发展重点项目

12“多层纤维及其复合材料的仿生”，中国博士后科学基金

13“复合材料仿生制备新途径”，国家自然科学基金重点项目

14“液相法纤维金属基复合材料的凝固研究”，国家自然科学基金面上项目

15“铸造高强度C/Mg复合材料”航空科学基金资助项目

中国机械工程学会表面工程分会委员；中国机械工程学会失效分析分会专家；《Surface Engineering》 reviewer 湘潭大学材料与光电物理学院兼职教授；科技部863计划课题同行专家；《Materials Letters》 reviewer 《力学文摘》编委《中国激光》审稿人。