沙建军，大连理工大学航空航天学院，教授，博士生导师。研究方向为主要研究航空航天领域和先进能源领域应用的高性能结构和功能材料复合材料。研究内容包括对先进复合材料的物理性能、力学性能、结构优化和设计以及制备工艺，采用实验研究和数值模拟研究相结合对材料进行多尺度分析与表征。

1.1994年7月-1997年7月：宁夏大学物理与电子信息工程系，助教。

2. 1997年7月-2000年7月：中国原子能科学研究院，工学硕士。

3. 2000年7月-2003年9月：中国原子能科学研究院，工学博士。

4. 2000年-2002年10月：宁夏大学物理与电子信息工程学院，讲师。

5. 2002年10月-2005年9月：京都大学，能源学博士，日本文部科学省省国费奖学金。

6. 2002-2005 期间两次兼任研究助手：（1）2002年12月-2003年3月：日本京都大学先进能源与理工学研究所，兼任研究助手，由日本文部省COE（Center Of Excellence）资助.（2）2004年6月-2005年3月：日本京都大学先进能源与理工学研究所，兼任研究助手，由日本文部省COE（Center Of Excellence）资助。

7. 2005年10月-2007年11月：受日本学术振兴会资助(JSPS: Japan Society for thePromotion of Science)，作为日本学术振兴会特别研究员在京都大学国际创新中心(International Innovation Center)从事合作研究。

8. 2007年11月-2009年5月：西南交通大学教授。

9. 2008年4月-2009年5月：洪堡学者，受德国洪堡基金会(Alexander von Humboldt Foundation)资助在德国巴伐利亚州拜罗伊特大学从事合作研究。

10. 目前：大连理工大学教授。

近五年主要论文清单：

1. 约翰·约翰逊 Sha, T. Hinoki, A. Kohyama, Microstructure evolution and high-温度 mechanical properties of Hi-NicalonTM Type S fiber annealed and crept under various oxygen partial pressures, Materials Characterization, 2009, 60:796-802.

2. J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Residual strain in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction and finite element analysis”, Collected in the Proceedings of the 16th International Conference on Composite Materials (ICCM-16), 2007, Kyoto, Japan.

3. J. J. Sha, S. Ochiai, H. Okuda, S. Iwamoto, Y. Waku, N. Nakagawa and A. Mitani “Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction”, Journal of the European Ceramic Society, 2008, 28 (12): 2319-2324.

4. 约翰·约翰逊 Sha, T. Hinoki, A. Kohyama, Thermal and mechanical stabilities of Hi-Nicalon fiber under annealing and creep in various oxygen partial pressures, Corrosion Science, 2008, 50(11): 3132-3138.

5. S. Ochiai, S. Ikeda, S. Iwamoto, J. J. Sha, H. Okuda, Y. Waku, N. Nakagawa, A. Mitani, M. Sato and T. Ishikawa, Residual Stresses in YAG of Melt Growth Al2O3/YAG Eutectic Composite Estimated by Indentation Fracture Test and Finite Element Analysis, Journal of the European Ceramic Society, 2008, 28 (12): 2309-2317.

6. J. J. Sha, T. Hinoki, and A. Kohyama, “Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures”, Journal of Materials Science, 42, 2007, pp: 5046-5056.

7. S. Ochiai, Y. Sakai, K. Kuhara, S. Iwamoto, 约翰·约翰逊 Sha, “Analytical modeling of stress-strain behavior at 1873 K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction,” Composite Science and Technology, 67 (2007): pp 270-277.

8. J. J. SHA, T. Hinoki, and A. Kohyama, “Tensile properties and microstructure characterization of Hi-NicalonTM SiC fibers under loading,” International Journal of Fracture, Vol. 142 (2006): pp 1-8.

9. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Microstructural characterization and Fracture properties of advanced SiC fibers under loading,” Materials Science and Engineering: A, (2007), 456: pp 72-77.

10. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Strength and fracture properties of advanced　SiC-based fibers”, Mechanics of Composite Materials, Vol. 42, No. 6, (2006):pp 527-534.

11. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Bend stress relaxation of advanced SiC-based fibers and its prediction to tensile creep” Mechanics of Materials, Vol. 39 (2), (2007): pp 175-182.

12. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Heat treatment effect on creep behavior of polycrystalline 碳化硅based fibers,” Materials Characterization, Vol. 57 (1), (2006): pp 6-11.

13. J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Hot corrosion, Oxidation and their effects on tensile strength of SiC fiber in alkaline melts,” Materials transaction, JIM, 46 (5) (2005) 1032-35.

14. J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, J. Yu, “Tensile properties and creep behavior of SiC-based fibers under various oxygen partial pressures,” Materials Science forum, Vols. 475-479 (2005):pp 1333-1336.

15. J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties of SiC-based fibers under crept condition”, Proceedings of the 8th Japan-China Symposium on Materials for Advanced 能量 Systems and Fission \u0026 Fusion Engineering，October 4 - 8, 2004 Sendai, JAPAN.

16. J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama,　“Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers, ” Journal of Nuclear Materials, Vols. 329-333 (2004): pp 592-596.

17. J.S. Park, Y. Katoh, A. Kohyama, J.K. Lee, J. J. SHA, H.K. Yoon, “Tailoring the microstructure of hot-pressed SiC by heat treatment,” Journal of Nuclear Materials, Vols. 329-333, (2004):pp 558-561.

18. Gang Yu, Xiaoqiang Li, Jianjun Sha, et al, “Research on the 表演 and experimental 能量 calibration of charged particle spectrometer-identificator,”核科学与工程, Vol. 24, (2004):pp 12-19.

19. Gang YU, Xiaoqiang LI, Jianjun SHA et al., “Recoils spectrum and distribution in SiCf/SiC composites irradiated by neutrons,”核科学与工程, Vol. 24, (2004):pp139-143

20. J. J. Sha, Y. Katoh, A. Kohyama, “Recent progress and critical issues of SiCf/SiC composite under irradiation environments,” Plasma Science \u0026 Technology, Vol.5, No. 5, (2003):pp 1965-1975.

21. J. J. Sha, M. Hauscherr, W. Krenkel, Fiber/matrix interfacial bonding properties at the CFRP step of C/C-SiC fabrication process, 2009, Aril. 1-4, Germany Ceramic Society conference, Bayreuth, Germany.

22. J. J. Sha, M. Hauscherr, W. Krenkel, The influence of thermal treatment of carbon fibers on the interfacial shear strength during the pyrolysis of CFRP to C/C composites, The proceedings of the 11th International Conference and Exhibition of the European Ceramic Society, 2009, Jun 21-25, Cracow, POLAND.

Jianjun Sha, 英文专著独立章节发表在“Strength of Materials”一书中，2009, ISBN: 978-1-60741-500-8, Nova Science Publisher，New York, U.S.A.

Jianjun Sha, Shojiro Ochiai et al., 发表英文专著独立章节在“Ceramic and Polymer Matrix Composites”一书中, Nova Science Publisher, New York，U.S.A. In press.

J. J. Sha, M. Hauscherr, W. Krenkel, Correlation between processing, microstructgure and 表演 of carbon fiber reinforced C-SiC composite, 2008, Oct. 8-10. Presentation at Alexander Von Foundation meeting, Darmstadt, Germany.

J. J. Sha, M. Hauscherr, W. Krenkel, Fiber/matrix interfacial bonding properties at the CFRP step of C/C-SiC fabrication process, 2009, Aril. 1-4, Oral presentation at German Ceramic Society conference, Bayreuth, Germany.

J. J. Sha, M. Hauscherr, W. Krenkel, The influence of thermal treatment of carbon fibers on the interfacial shear strength during the pyrolysis of CFRP to C/C composites, Oral presentation at the 11th International Conference and Exhibition of the European Ceramic Society, 2009, Jun 21-25, Cracow, POLAND.

J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Effect of microstructure on residual stress and its distribution in DSE by numerical analysis”, Oral presentation at 2007 fall meeting of Japan Institute of Metals, Gifu University, Nagoya, Japan, Sep. 19-22, 2007.

J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Residual strain in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction and finite element analysis”, Oral presentation as specialist at the 16th International Conference on Composite Materials (ICCM-16), 2007, Kyoto, Japan.

J. J. Sha, S. Ochiai, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, “Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction”, Oral presentation at Fall meeting of Japan Institute of Metals, Sept., 16-18, 2005, Nigata University, Japan.

S. Ochiai, S. Ikeda, S. Iwamoto, J. J. Sha, H. Okuda, Y. Waku, M. Nakagawa, A. Mitani, M. Sato and T. Ishikawa, “Residual Stresses in YAG of Melt Growth Al2O3/YAG Eutectic Composite Estimated by Indentation Fracture Test and Finite Element Analysis,” Oral presentation at 2nd Directionally Solidified Eutectic Ceramics Workshop, December 4th-6th, 2006, Kyoto, JAPAN.

J. J. Sha, S. Ochiai, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani “Residual stresses in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite”, Presented at the 2nd Directionally Solidified Eutectic Ceramics Workshop, December 4th-6th, 2006, Kyoto, JAPAN.

J. J. Sha, T. Nozawa, Y. Katoh, A. Kohyama, “Mechanical property and microstructure of SiC/SiC composite” (subtitle: The first trial of large scale production by NITE process), presented at the 1st COE (Center Of Excellence) international symposium on the sustainable 能量 system, March 13-14, 2003, Campus Plaza Kyoto, Kyoto, Japan.

J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the creep behavior of silicon carbide fibers”, Oral presentation at Fall meeting of Japan Institute of Metals, October, 11-14, 2003, Hokkaido university, Japan.

J.S. Park, J. K. Lee, J. J. Sha, Y. Katoh, A. Kohyama, “Heat treatment effect on the oxidation behavior of LPS SiC,” Oral presentation at Fall meeting of Japan Institute of Metals, Oct. 11-14, 2003, Hokkaido University, Japan.

J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the tensile strength and creep resistance of advanced silicon carbide fibers”, presented at ICFRM11, December, 7-12, 2003, Kyoto, Japan.

Yu Jinnan, Wu Yican, Sha Jianjun, et al, “Neutron radiation effects of the center conductor post in a spherical tokamak reactor, presented at ICFRM10, Oct. 10-16, Barden-Barden, Germany.

J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Creep resistance and tensile properties of advanced SiC fibers under severe environments”, presented at the 2nd domestic symposium for 21st century COE program, March, 8-9, 2004, Kyoto University, Japan.

J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, A. Kohyama, “Environmental effects on creep resistance and microstructure of SiC fibers”, Oral presentation at Spring meeting of Japan Institute of Metals, March 30-Apri. 1, 2004, Tokyo Institute of Technology, Japan.

J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties of SiC-based fibers under crept condition”, Oral presentation at the symposium of Fifth Nuclear Fusion Society, June 17-18, 2004, Sendai, Japan.

J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Tensile properties and microstructural characterization of SiC-based fibers under crept conditions”, Oral presentation at symposium of 2nd International School of 能量 Science, July 19-20, 2004, Rajamagara Institute of Technology, Bangkok, Thailand.

J. J Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Hot corrosion, oxidation and their effect on the tensile properties of SiC-based SiC fibers in alkaline melts”, Oral presentation at Fall meeting of Japan Institute of Metals, Sep. 28-31, 2004, Akita University, Japan.

J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Tensile Behavior and Fracture Surface Characterization of SiC-based Fibers under Applied Load”. Oral presentation at the 8th Japan-China Symposium on Materials for Advanced 能量 Systems and Fission \u0026 Fusion Engineering October 4 - 8, 2004 Sendai, JAPAN.

J. J. Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties and creep behavior of SiC-based fibers under various oxygen partial pressures”.Oral presentation at the Fifth Pacific Rim International Conference on Advanced Materials and Processing (PRICM5), Nov. 2-5, 2004, Beijing, China.

J. J. Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Oxidation and Hot corrosion of SiC materials in alkaline melts”, presented at the 2 International Symposium on Sustainable 能量 System, Kyoto University, Dec. 17-18, 2004, Kyoto Univeristy, Kyoto, Japan.

J. J Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Oxidation and corrosion of SiC materials in alkaline melts”, oral presentation at Spring meeting of Japan Institute of Metals, March, 29, 2005, 横滨市 National University, Japan.

1. 2007.11：德国洪堡基金会（AvH Foundation：Alexander von Humboldt Foundation）研究奖学金。

2. 2005.9: 日本学术振兴会（JSPS:Japan Society for the Promotion of Science）研究奖励费。

3. 2002. 6：日本文部省（日本文部科学省：Ministry of Education, Culture, Sports, Science and Technology）囯费奖学金。

4. 2000.3：中国原子能科学研究院反应堆工程与设计研究所青年学术报告一等奖。

5. 2000.7：中国原子能科学研究院青年学术报告二等奖（一等奖空缺）。

6. 1994.1：宁夏回族自治区优秀毕业生。